Skip to content
fieldofviewcalculator.com

Projector Throw Distance Calculator

Projector throw distance calculator

Distance unit
Aspect ratio

Result

Screen width
104.6 in (265.7 cm)
Screen height
58.8 in (149.4 cm)
Throw distance
13.07 ft (3.98 m)
Zoom range
–
Throw-ratio class
Standard throw
Throw ratio needed
–
Standard projector
–

Width 120 × 16 ÷ 18.36 = 104.6 in; throw 104.6 × 1.5 = 156.9 in = 13.07 ft.

Find how far back your projector must sit for your screen size. Enter the throw ratio and screen diagonal, and get the exact throw distance in feet or metres.

What is throw distance?

Throw distance is how far back the projector lens must sit from the screen to fill it exactly. A 120-inch 16:9 screen is 104.6 inches wide (104.59 in exact), so a projector with a 1.5:1 throw ratio must sit 104.59 × 1.5 = 156.88 inches back — 13.07 feet, or 3.98 metres. Move it closer and the picture spills past the screen edges; move it further and the picture shrinks inside the frame.

The distance is measured from the lens, not from the wall behind the projector. A projector body is about a foot deep, so the shelf or mount must sit roughly a foot further back than the throw distance itself.

  • Image width thrown–
  • Overfill (+) / underfill (−)–
  • Throw distance in feet–
  • Fills the screen exactly
  • Overfills — too close
  • Underfills — too far

120-inch screen, 1.5:1 lens: at 3.98 m the picture is 104.6 in wide — exactly the screen.

How throw ratio works

Throw ratio is the distance divided by the image width, and it is the one number that decides where the projector goes. A 100-inch 16:9 screen is 87.2 inches wide. At 1.5:1 the projector sits 87.16 × 1.5 = 130.7 inches back, 10.89 feet. At 1.0:1 it sits 7.26 feet back, and at 2.0:1 it sits 14.53 feet back — same screen, three very different rooms.

The ratio is printed on the projector box or in the manual, usually as a range for a zoom lens. A fixed-lens projector has one ratio; a zoom projector has a min–max pair, and the room must fit somewhere inside it.

  • Throw distance–
  • Throw distance in metres–

100-inch 16:9 screen, 87.2 in wide: 1.0:1 → 7.26 ft, 1.5:1 → 10.89 ft, 2.0:1 → 14.53 ft.

Screen size first — the width is what matters

Throw distance comes from the screen width, not the diagonal, so work out the width first. A 120-inch 16:9 screen is 104.6 inches wide and 58.8 inches tall. A 65-inch screen is 56.7 inches wide, a 100-inch screen is 87.2 inches wide, and a 150-inch screen is 130.7 inches wide — all 16:9.

The aspect ratio changes the width for the same diagonal. A 100-inch 21:9 screen is 91.9 inches wide, wider than the 16:9 version, while a 100-inch 4:3 screen is only 80.0 inches wide. Enter the aspect ratio before the throw ratio, or the distance will belong to a different screen.

Screen diagonal (16:9)

  • Screen width–
  • Throw distance at 1.5:1–

At 1.5:1: 65-inch → 7.08 ft, 100-inch → 10.89 ft, 150-inch → 16.34 ft. A 100-inch 21:9 screen is 91.9 in wide (11.49 ft); 4:3 is 80.0 in (10.00 ft).

Ultra-short, short, standard, or long throw?

The throw ratio puts the projector in one of four classes, and the class decides where it lives in the room. Ultra-short throw is below 0.4:1: a 0.25:1 projector fills a 100-inch screen from 1.82 feet away, sitting on the TV stand under the screen.

Short throw is 0.4:1 to 1.0:1: a 0.5:1 projector fills the same screen from 3.63 feet. Standard is 1.0:1 to 2.0:1, the living-room range — 10.89 feet at 1.5:1. Long throw is above 2.0:1: a 2.5:1 projector needs 21.79 feet for a 120-inch screen, a dedicated cinema room.

The class is a property of the projector, not the screen. The same 1.5:1 projector is standard throw on every screen size; only the distance changes, because the width changes.

Throw class

  • Throw distance — 100-inch screen–
  • Throw distance in metres–

100-inch screen: ultra-short throw sits on the TV stand (1.82 ft), short throw on a coffee table (3.63 ft), standard on a shelf (10.89 ft), long throw at the back wall (18.16 ft). A 2.5:1 projector needs 21.79 ft for a 120-inch screen.

Zoom lenses — a range, not a single distance

A zoom lens gives a throw range, and the room must fit inside it, not on one exact spot. A projector with a 1.3:1 to 2.1:1 zoom fills a 100-inch screen from anywhere between 9.44 feet and 15.25 feet — 2.88 m to 4.65 m. Put the mount anywhere in that band and the zoom fills the screen exactly.

The band is widest on a big screen and narrowest on a small one, because the band is the ratio range times the width. Check the far end first: if the room is shorter than the minimum distance, even full wide-angle zoom cannot shrink the picture enough, and the screen is too big for the room.

  • Widest image (at 1.3:1)–
  • Narrowest image (at 2.1:1)–
  • Screen width–
  • Inside the zoom band — the screen fills exactly
  • Too close — overfills even at full wide angle
  • Too far — underfills even at full telephoto

100-inch screen, 1.3:1–2.1:1 zoom: the band runs 9.44–15.25 ft (2.88–4.65 m).

The reverse solver — start from the room

If the room is fixed, work backwards: the throw ratio you need is the room distance divided by the screen width. A 12-foot room and a 100-inch screen need 144 / 87.2 = 1.65:1. A 15-foot room and a 120-inch screen need 180 / 104.6 = 1.72:1. A 10-foot room and a 100-inch screen need 120 / 87.2 = 1.38:1.

The reverse answer tells you which projector to buy. A 1.65:1 need is met by any standard zoom that covers 1.65:1 — a 1.3:1 to 2.1:1 zoom fits, because it can sit anywhere in the room's depth, including at the back wall. A fixed 1.5:1 lens must sit at exactly 10.89 ft for a 100-inch screen, leaving only about 1.1 ft for the body — too tight for most mounts.

  • Ratio needed — 120-inch screen–
  • Ratio needed — 100-inch screen–
  • Fixed 1.5:1 distance — 120-inch–
  • A 1.3:1–2.1:1 zoom fits this room
  • A fixed 1.5:1 lens fits (needs 13.07 ft)
  • Too short for a fixed 1.5:1 lens

12 ft + 100-inch screen → 1.65:1; 15 ft + 120-inch → 1.72:1; 10 ft + 100-inch → 1.38:1.

Throw distance is not the viewing distance

The projector sits where the throw distance says; you sit where the viewing angle says, and the two numbers are different. A 120-inch screen is 265.7 cm wide, so the 30° SMPTE seat is 4.96 m back and the 40° THX seat is 3.65 m back. The projector at 1.5:1 sits 3.98 m back — inside the seating band, above or just behind the sofa, which is exactly where a ceiling mount belongs.

Confusing the two distances is the most common home-cinema mistake. A projector mounted at the 30° seat distance of 4.96 m with a 1.5:1 lens would throw a picture 130.2 inches wide on a 120-inch screen — over a foot too wide on each side. Use the throw distance for the mount and the viewing distance for the sofa.

  • Screen width–
  • Projector throw (1.5:1)–
  • SMPTE 30° seat–
  • THX 40° seat–

120-inch screen: the projector (3.98 m) sits inside the seating band, just behind the sofa — exactly where a ceiling mount belongs.

When the number looks wrong

Three things make a throw distance wrong: measuring from the wall, forgetting the offset, and trusting keystone. Measure from the front of the lens, not from the wall or the back of the projector — the body adds about a foot. Check the lens offset: many projectors throw the image above the lens axis, so the mount height matters as much as the distance. And do not plan on keystone correction to fix a bad mount: it shrinks the picture and softens the edges.

If the throw ratio is not printed on the box or in the manual, check the maker's throw-distance calculator for the model, or write to us via Contact and tell us the model — we will work out the ratio from the manual's distance table.

  • Wrong: Mount 13.07 ft from the screen, measured from the wall

    Right: Mount about 14.07 ft from the screen, measured from the lens. The projector body adds about a foot, so measuring from the wall puts the lens a foot too close and the picture overfills.

  • Wrong: Mount at any height — only the distance matters

    Right: Check the lens offset before fixing the mount height. Many projectors throw the image above the lens axis, so the mount height matters as much as the distance.

  • Wrong: Fix a bad mount with keystone correction

    Right: Mount at the throw distance and leave keystone off. Keystone correction shrinks the picture and softens the edges; it cannot fix a wrong mount.

Tap a card to see the right number.

Practice

  • 100-inch screen, 1.2:1 throw ratio — A 100-inch 16:9 screen and a projector with a 1.2:1 throw ratio. Find the throw distance in feet and metres.

    <strong>Answer:</strong> Width = 100 × 16 / √(16² + 9²) = 87.2 inches. Distance = 87.2 × 1.2 = 104.6 inches = 8.72 feet = 2.66 m.

  • Reverse solver: 12-foot room, 120-inch screen — A living room gives 12 feet from lens to screen. What throw ratio does a 120-inch 16:9 screen need, and does a fixed 1.5:1 projector fit?

    <strong>Answer:</strong> Width = 104.6 inches. Ratio needed = 144 / 104.6 = 1.38:1. A fixed 1.5:1 projector needs 13.07 feet, so it does not fit in a 12-foot room — a zoom covering 1.38:1 (for example 1.2:1 to 2.0:1) does.

  • Zoom range on an 80-inch screen — An 80-inch 16:9 screen and a projector with a 1.3:1 to 2.1:1 zoom. Find the nearest and farthest throw distances.

    <strong>Answer:</strong> Width = 80 × 16 / √(16² + 9²) = 69.7 inches. Nearest = 69.7 × 1.3 = 90.6 inches = 7.55 feet (2.30 m). Farthest = 69.7 × 2.1 = 146.4 inches = 12.20 feet (3.72 m).

Tap a question to see its answer.

All calculators

Frequently asked questions

13.07 feet (3.98 m) with a 1.5:1 throw ratio. The screen is 104.6 inches wide, so 104.59 × 1.5 = 156.88 inches = 13.07 feet. With a 1.3:1 to 2.1:1 zoom lens the range is 11.33 feet to 18.30 feet — put the mount anywhere in that band.