Compare Two Camera Setups
Result
Setup A — Full frame
- Horizontal angle
- Vertical angle
- Diagonal angle
- Frame width
- Frame height
- Crop factor
- 35 mm equivalent
Setup B — Nikon APS-C
- Horizontal angle
- Vertical angle
- Diagonal angle
- Frame width
- Frame height
- Crop factor
- 35 mm equivalent
Full frame (A) is wider by 13.04° and 2.48 m at 10.0 m.
Both setups are the same — change one lens or sensor to compare.
Enter a number.
Compare two camera setups side by side. Enter sensor and focal length for each, and see both fields of view, frame sizes and equivalents at once in seconds.
Which setup is wider?
A 50 mm lens on full frame is wider than the same lens on Nikon APS-C, by 13.04 degrees and 2.48 m at 10.0 m. Full frame gives 39.60 degrees and a 7.20 m frame, while Nikon APS-C gives 26.56 degrees and a 4.72 m frame, because 10.0 x 23.6 / 50 = 4.72 m. The sensor alone decides this comparison, because the focal length is the same on both sides.
That is the question this page answers first. Pick two real setups, read the winner line, and stop guessing from lens numbers alone. A millimeter count without a sensor behind it cannot tell you which picture is wider.
- Horizontal angle
- Frame width at 10 m
Setup A: full frame. At 50 mm it gives 39.60° and a 7.20 m frame.
- Horizontal angle
- Frame width at 10 m
Setup B: Nikon APS-C. At 50 mm it gives 26.56° and a 4.72 m frame — the same lens, 2.48 m narrower.
Same lens, different sensor
The same 50 mm lens frames five different widths on the five sensors, from 7.20 m down to 2.64 m at 10.0 m. Full frame gives 7.20 m, Nikon APS-C gives 4.72 m, Canon APS-C gives 4.46 m, Micro Four Thirds gives 3.46 m, and 1-inch gives 2.64 m. The angles run 39.60, 26.56, 25.14, 19.63, and 15.04 degrees in the same order.
This is the cheapest lesson in the comparison. Before you buy a new lens, check whether the body you already own changes the answer. A photographer moving from full frame to Micro Four Thirds loses more than half the frame width with the same lens.
Preset pair — 50 mm lens on both
- Frame A at 10 m
- Frame B at 10 m
- Width gap
- Angle A
- Angle B
Both frames draw at once with the width gap between their edges: full frame vs Micro Four Thirds is 7.20 m vs 3.46 m, a 3.74 m gap.
Same sensor, different lens
On one sensor, the shorter lens always wins on width, and the gap is easy to count. A 24 mm lens on full frame gives 73.74 degrees and a 15.00 m frame at 10.0 m, while a 35 mm lens gives 54.43 degrees and a 10.29 m frame. The 24 mm lens is wider by 19.31 degrees and 4.71 m.
Lens comparisons on the same body are the fairest kind, because the sensor cancels out. If you own one body and two lenses, this is the only comparison you need, and the winner line will rarely surprise you. The surprise comes when the bodies differ.
Lens duel — one shared full frame sensor
- Angle A
- Angle B
- Frame A at 10 m
- Frame B at 10 m
- Angle gap
- Frame gap
The shorter lens always wins on width: 24 mm beats 35 mm by 19.31° and 4.71 m.
The cross-body trap
A 35 mm lens on Canon APS-C is narrower than a 24 mm lens on full frame, even though 35 mm sounds longer than 24 mm — the sensor, not the lens number, decides the field. The Canon setup gives 35.34 degrees and a 6.37 m frame at 10.0 m, while the full frame setup gives 73.74 degrees and a 15.00 m frame. The gap is 38.40 degrees and 8.63 m, and it comes from the sensor, not the lens.
This trap catches buyers who compare lens numbers across systems. A 35 mm lens is not a 35 mm field of view. It is a 35 mm lens on a sensor, and the sensor in this pair gives away more than the lens gains.
- Horizontal angle
- Frame width at 10 m
- Horizontal angle
- Frame width at 10 m
The Canon frame sits inside the full frame frame — 8.63 m narrower in total (15.00 m vs 6.37 m), 4.31 m lost on each side. The sensor, not the lens number, decides.
Matching a look across bodies
A 24 mm lens on Micro Four Thirds nearly matches a 50 mm lens on full frame, and it is wider by 0.04 degrees. The Micro Four Thirds setup gives 39.64 degrees, because 2 x arctan(17.3 / 48) = 39.64 degrees, while the full frame 50 mm gives 39.60 degrees. The frames at 10.0 m are 7.21 m and 7.20 m, a gap of 0.01 m.
That near-match is the point. To copy a full frame look on Micro Four Thirds, halve the focal length: 50 mm becomes 25 mm, 85 mm becomes 42.5 mm, and 24 mm becomes 12 mm. A 12 mm lens on Micro Four Thirds gives 71.57 degrees, close to the 73.74 degrees of a 24 mm lens on full frame.
- 24 mm full frame → 12 mm on Micro Four Thirds: 71.57° vs 73.74°, gap 2.17°.
- 35 mm full frame → 17.5 mm on Micro Four Thirds: 52.61° vs 54.43°, gap 1.83°.
- 50 mm full frame → 25 mm on Micro Four Thirds: 38.17° vs 39.60°, gap 1.43°. A 24 mm lens is closer still: 39.64°, gap 0.04°.
- 85 mm full frame → 42.5 mm on Micro Four Thirds: 23.01° vs 23.91°, gap 0.90°.
Telephoto comparisons
At the long end, small angle gaps hide large frame gaps. An 85 mm lens on full frame gives 23.91 degrees and a 4.24 m frame at 10.0 m, while the same lens on Nikon APS-C gives 15.81 degrees and a 2.78 m frame. The angle gap is only 8.10 degrees, but the frame gap is 1.46 m, which is most of a person.
Wildlife and sports photographers live in this range, and they feel the frame gap more than the angle gap. A bird that fills the frame on APS-C is a small dot on full frame with the same lens, and no amount of angle talk changes that picture.
- Full frame frame width
- Nikon APS-C frame width
- Frame gap
- Full frame angle (fixed)
- Nikon APS-C angle (fixed)
Angles stay fixed (23.91° and 15.81°) — only the frame gap grows, from 1.46 m at 10 m to 14.59 m at 100 m.
Reading the winner line
The winner line names the wider setup, the angle gap, and the frame gap, in that order. For 50 mm full frame against 50 mm Nikon APS-C it reads: full frame is wider by 13.04 degrees and 2.48 m at 10.0 m. For 24 mm full frame against 35 mm Canon APS-C at 5.0 m it reads: full frame is wider by 38.40 degrees and 4.31 m.
Read all three numbers, not just the winner. A setup can win on angle and still lose the shot if its frame at your real distance is too wide for the subject. The distance you actually stand at is part of the comparison, not an afterthought.
- Horizontal angle
- Frame width at 10 m
- Horizontal angle
- Frame width at 10 m
Click either card to make it the reference. Read as a winner line: full frame is wider by 13.04° and 2.48 m at 10.0 m.
When a tie is the answer
Two different setups can tie, and a tie is useful information. A 24 mm lens on Micro Four Thirds at 39.64 degrees ties a 50 mm lens on full frame at 39.60 degrees within 0.04 degrees, and their frames at 10.0 m differ by only 0.01 m. Either setup takes the same picture from the same spot.
A tie means you can choose on price, weight, or the body you already own, instead of on field of view. The comparison has done its job when it tells you the optics do not decide, and something else should.
Tie detector — angles within 0.5° tie
- Angle A
- Angle B
- Gap
A gap of 0.5° or less is a tie, not a winner. Only the first pair ties: 39.64° vs 39.60°, gap 0.04°, frames 7.21 m vs 7.20 m.
Practice
Compare 35 mm on full frame with 35 mm on Canon APS-C at 10.0 m.
<strong>Answer:</strong> full frame 54.43 degrees and 10.29 m; Canon 35.34 degrees and 6.37 m. Full frame is wider by 19.09 degrees and 3.92 m.
Compare 50 mm on Micro Four Thirds with 50 mm on a 1-inch sensor at 10.0 m.
<strong>Answer:</strong> Micro Four Thirds 19.63 degrees and 3.46 m; 1-inch 15.04 degrees and 2.64 m. Micro Four Thirds is wider by 4.59 degrees and 0.82 m.
Find the Micro Four Thirds lens that matches 85 mm on full frame.
<strong>Answer:</strong> 85 / 2.00 = 42.5 mm. A 42.5 mm lens gives 23.01 degrees, against 23.91 degrees for 85 mm on full frame, a gap of 0.90 degrees.
Tap a question to see its answer.
All calculators
- Focal lengthf = D · d / W
- DistanceD = W · f / d
- Crop factorCF = 43.27 / diagonal
- CompareAOV = 2 · arctan(d / (2f))
- CCTVD = (f · px) / (PPM · sensor width)
- TelescopeTFOV = AFOV / M
- BinocularsExit pupil = D / M
- Gaming FOVH = 2 · arctan(tan(V / 2) × aspect ratio)
- TV distanceDistance = width / (2 · tan(θ / 2))
- From a photoW = D · d / f
- Projector throwThrow distance = throw ratio × screen width
- MicroscopeField diameter = FN / objective magnification
No calculator matches your search.
Frequently asked questions
It is wider on full frame, by 13.04 degrees. Full frame gives 39.60 degrees and a 7.20 m frame at 10.0 m, while Nikon APS-C gives 26.56 degrees and a 4.72 m frame. The gap in frame width is 7.20 minus 4.72, which is 2.48 m.
A 25 mm lens nearly matches it. The 25 mm lens on Micro Four Thirds gives 38.17 degrees, against 39.60 degrees for 50 mm on full frame, a gap of 1.43 degrees. A 24 mm lens on Micro Four Thirds gives 39.64 degrees, which is closer, with a gap of only 0.04 degrees.
No — it is much narrower. The Canon setup gives 35.34 degrees and a 6.37 m frame at 10.0 m, while the full frame setup gives 73.74 degrees and a 15.00 m frame. The full frame setup is wider by 38.40 degrees and 8.63 m.
The full frame setup is wider. It gives 23.91 degrees and a 4.24 m frame at 10.0 m, against 15.81 degrees and a 2.78 m frame on Nikon APS-C. The gaps are 8.10 degrees and 1.46 m.
Yes — when the focal length ratio matches the crop factor ratio. A 24 mm lens on Micro Four Thirds gives 39.64 degrees and a 50 mm lens on full frame gives 39.60 degrees, a gap of 0.04 degrees. Their frames at 10.0 m are 7.21 m and 7.20 m, a gap of 0.01 m.