Skip to content
fieldofviewcalculator.com

Field of View Calculator

Field of view calculator

Distance unit
Sensor

Result

Horizontal angle
39.60°
Vertical angle
26.99°
Diagonal angle
46.80°
Frame width
7.20 m
Frame height
4.80 m
Crop factor
1.00
35 mm equivalent
50 mm

Use this calculator to find how much a camera, CCTV camera, telescope, or pair of binoculars can see. Type in a focal length, pick a sensor, and add a distance. You get the angle in degrees and the frame size in metres and feet in seconds.

The hub calculator above plus twelve tool pages cover every job on this site, each worked from verified formulas.About Field of View Calculator says who built the site and how every result is calculated.

What is field of view?

Field of view is the width of the scene your camera can see. It is the size of the frame, from left edge to right edge. A wide lens sees more of the scene. A long lens sees a small slice of it.

Photographers also say angle of view: the angle in degrees, while field of view is the width in metres or feet. A 50 mm lens on full frame has a horizontal angle of 39.60 degrees. At 10 metres, its frame is 7.20 by 4.80 metres.

Try it: Drag the focal-length slider from 14 mm to 200 mm and watch the frame cone widen and narrow.

  • Horizontal angle–
  • Frame width at 10 m–
  • Frame height at 10 m–

Full frame sensor (36 × 24 mm), 10 m distance. At 50 mm: 39.60° across, 7.20 × 4.80 m frame.

How do I calculate field of view?

Work out the angle first, then work out the frame size at your distance. Take the sensor width and divide it by twice the focal length. Take the inverse tangent of that number and double it.

Frame width is distance times sensor width, divided by focal length. A 50 mm lens on full frame at 10 metres gives 10 times 36 divided by 50, which is 7.20 metres. Height is 10 times 24 divided by 50, or 4.80 metres.

Try it: Tap each step in order and watch the calculator fill in that step with your own numbers.

  1. The angle: 2 × arctan(36 ÷ 100) = 39.60°. Sensor width 36 mm divided by twice the focal length (2 × 50 mm), inverse tangent, doubled.
  2. The frame at 10 m: width 10 × 36 ÷ 50 = 7.20 m, height 10 × 24 ÷ 50 = 4.80 m.

What is the field of view formula?

The formula is AOV = 2 × arctan(d ÷ (2 × f)). AOV is the angle of view in degrees. The letter d is the sensor size in millimetres, and f is the focal length in millimetres.

Use sensor width for the horizontal angle and height for the vertical angle. Frame width is W = D × d ÷ f, where D is distance and W is frame width. Flip it for focal length: f = D × d ÷ W.

Try it: Tap a symbol in the formula — d, f, D, or W — and see it light up in the worked example.

AOV = 2 × arctan( ÷ (2 × ))

On full frame: 2 × arctan( ÷ (2 × )) = 2 × arctan(36 ÷ 100) = 39.60°; frame = × ÷ = 10 × 36 ÷ 50 = 7.20 m

  • d — sensor size in millimetres — 36 mm wide on full frame
  • f — focal length in millimetres — 50 mm here
  • D — distance to the subject in metres — 10 m here
  • W — frame width in metres — 7.20 m here

Tap a symbol to see what it means.

Which sensor size do I have?

Your sensor size is the width and height of the light-sensitive chip in your camera. A full-frame sensor is 36 by 24 millimetres. Smaller sensors see a narrower angle with the same lens. Check your camera manual for the exact size.

The five sizes here are full frame 36 by 24, Nikon APS-C 23.6 by 15.7, Canon APS-C 22.3 by 14.9, Micro Four Thirds 17.3 by 13, and 1-inch 13.2 by 8.8 millimetres. Pick yours, or type a custom width and height.

Try it: Tap a sensor name and watch the angle and the frame change for the same 50 mm lens.

Pick a sensor — 50 mm lens, 10 m distance

  • Horizontal angle–
  • Vertical angle–
  • Frame width at 10 m–
  • Frame height at 10 m–

Custom width and height: type them in the calculator above.

How does focal length change field of view?

A longer focal length gives a narrower field of view. Double the focal length and the frame gets about half as wide. A 24 mm lens on full frame sees 73.74 degrees across. A 200 mm lens sees only about 10.29 degrees.

At 10 metres, the 24 mm lens frames 15.00 by 10.00 metres. The 200 mm lens frames only 1.80 metres wide at the same distance. Wide lenses suit rooms and landscapes; long lenses suit sport and wildlife.

Try it: Drag the focal-length slider from 14 mm to 400 mm and watch the table row for your lens light up.

  • Horizontal angle–
  • Frame width at 10 m–
  • Frame height at 10 m–
  • 14 mm — 104.25° — 25.71 m at 10 m
  • 24 mm — 73.74° — 15.00 m at 10 m
  • 35 mm — 54.43° — 10.29 m at 10 m
  • 50 mm — 39.60° — 7.20 m at 10 m
  • 85 mm — 23.91° — 4.24 m at 10 m
  • 135 mm — 15.19° — 2.67 m at 10 m
  • 200 mm — 10.29° — 1.80 m at 10 m
  • 400 mm — 5.15° — 0.90 m at 10 m

Full frame sensor, 10 m distance. The table row for your focal length lights up.

How far back do I need to stand?

Stand farther back when the subject is wide or the lens is long. The distance is the subject width times the focal length, divided by the sensor width. That is the whole rule, and it works for any camera and any lens.

A 2-metre group with a 50 mm lens on full frame needs 2 times 50 divided by 36, which is 2.78 metres. A 5-metre house front needs 5 times 50 divided by 36, or 6.94 metres. Move back, or fit a wider lens.

Try it: Type your subject width, then drag the distance slider until the frame just fits it.

  • Frame width–
  • Frame height–
  • Distance needed for a 2 m group–

Subject: a 2 m group, 50 mm lens on full frame. Drag until the frame reads 2.00 m — that happens at 2.78 m.

What does crop factor do to field of view?

Crop factor tells you how much narrower a smaller sensor sees than full frame. Full frame has a crop factor of 1.00. Nikon APS-C has a crop factor of 1.53, and Micro Four Thirds has a crop factor of 2.00.

Multiply focal length by crop factor to get the full-frame match. A 50 mm lens on Nikon APS-C acts like a 76.5 mm lens on full frame. A 25 mm lens on Micro Four Thirds acts like a 50 mm lens.

Try it: Tap a sensor to compare it with full frame and watch the equivalent focal length update.

Tap a sensor to compare it with full frame — 50 mm lens

  • 35 mm equivalent–
  • Crop factor–
  • Horizontal angle–
  • Frame width at 10 m–

Full frame is the baseline: 50 mm, 39.60°, 7.20 m at 10 m.

Which lens wins? Compare two setups

Compare lenses side by side, not from memory. The wider angle always frames more of the scene. A 35 mm lens on Nikon APS-C gives a 37.26-degree horizontal angle. A 50 mm lens gives only 26.56 degrees.

At 10 metres, the 35 mm lens frames 6.74 metres wide, while the 50 mm lens frames 4.72 metres wide. That 2.02-metre gap decides whether a whole group fits. Pick the lens that fits your subject, not the lens you happen to own.

Try it: Switch lens A and lens B and watch the two frames overlay on the same scene.

  • Horizontal angle–
  • Frame width at 10 m–
  • Horizontal angle–
  • Frame width at 10 m–

Both on Nikon APS-C (23.6 mm wide), 10 m distance. Lens A frames 6.74 m, lens B 4.72 m — a 2.02 m gap.

What field of view does a CCTV camera need?

Pick a CCTV lens by the width you must cover, not by the lens name. A 4 mm lens on a 1/3-inch CCTV sensor gives a 61.93-degree horizontal angle. At 20 metres, it covers 24.0 metres wide.

For faces, use pixel density, not angle alone. DORI stands for Detect, Observe, Recognise, and Identify. Identify needs 250 pixels per metre, so an 8-megapixel camera with a 4 mm lens identifies a face up to 12.8 metres away.

Try it: Drag the distance slider and watch the DORI tier change colour as the face gets too far away.

  • Pixel density–
  • Identify distance–
  • Identify — 250 px/m or more (up to 12.8 m)
  • Recognise — 125 px/m or more (up to 25.6 m)
  • Observe — 62.5 px/m or more (up to 51.2 m)
  • Detect — 25 px/m or more (up to 128.0 m)
  • Too far to detect — below 25 px/m (past 128.0 m)

DORI worked example: 4 mm lens, 3,840 px, 4.8 mm sensor (1/3-inch). Identify needs 250 px/m.

What field of view will my telescope or binoculars show?

A telescope shows a true field of view: the eyepiece field divided by the magnification. A 1,000 mm telescope with a 25 mm Plossl eyepiece gives 40 times magnification. Its 52-degree field becomes a true field of 1.30 degrees, or 78 arcminutes.

The Moon is 0.5 degrees wide, so it fills 38.5 percent of that field. Andromeda is 3.1 degrees wide, so it does not fit. With 10×50 binoculars and a 6.5-degree field, you see 114 metres wide at 1,000 metres.

Try it: Tap a sky object — the Moon, the Pleiades, or Andromeda — and see it drawn to scale inside your field circle.

Tap a sky object — true field 1.30° (1,000 mm telescope, 25 mm Plossl, 40×)

  • Object size–
  • Share of the field–

100% or less fits in the field; more than 100% does not. The Moon (38.5%) fits; the Pleiades (153.8%) and Andromeda (238.5%) do not.

Which mistakes make field of view wrong?

The most common mistake is to use the equivalent focal length instead of the real one. A phone lens marked 26 mm is really about 7 mm. Divide the 26 mm equivalent by the crop factor — about 3.5 for a 1/1.3-inch phone sensor — and you get 7.4 mm. Type the real focal length in, or the angle will be far too narrow.

Three more traps catch beginners. A fisheye lens does not follow the formula on this page. Distance changes the frame size, never the angle. The diagonal angle is the makers’ headline number, while video and CCTV quote the horizontal angle.

Try it: Click each mistake and watch the wrong number flip to the right one.

  • Wrong: a phone lens marked 26 mm is really 26 mm

    Right: about 7.4 mm — 26 ÷ 3.5. 26 mm is the full-frame equivalent. Divide by the crop factor (about 3.5 for a 1/1.3-inch phone sensor) to get the real focal length, about 7.4 mm. Type the real focal length in, or the angle comes out far too narrow.

  • Wrong: a fisheye lens follows AOV = 2 × arctan(d ÷ (2 × f))

    Right: a fisheye lens needs a different formula. The formula on this page is for rectilinear lenses only. A fisheye lens bends the image, so the same focal length gives a much wider angle than the formula says.

  • Wrong: stepping back widens the angle of view

    Right: the angle stays 39.60° — only the frame grows. Distance changes the frame size, never the angle. A 50 mm lens on full frame frames 3.60 m wide at 5 m and 7.20 m at 10 m, but the angle is 39.60° at both distances.

  • Wrong: a 50 mm lens on full frame is 46.80° across

    Right: 39.60° across — 46.80° is the diagonal. Makers quote the diagonal angle as the headline number. Video and CCTV quote the horizontal angle, which is 39.60° for a 50 mm lens on full frame.

Tap a card to see the right number.

Try it yourself: three practice questions

Test yourself with three quick questions, then check each answer below. What focal length gives 90 degrees across on full frame? How wide is a 24 mm frame at 10 metres? How far back for a 5-metre house front with a 50 mm lens?

The answers are 18.0 mm, 15.00 metres wide, and 6.94 metres back. The 90-degree answer is 36 divided by 2, because the tangent of 45 degrees is 1. The house distance is 5 times 50 divided by 36.

---

  1. What focal length gives a 90-degree field of view on full frame?

    mm
  2. How wide is a 24 mm frame at 10 metres on full frame?

    m
  3. How far back must you stand for a 5-metre house front with a 50 mm lens on full frame?

    m

All field of view tools

All calculators

Frequently asked questions

Field of view is how much scene fits in your photo. A 50 mm lens on full frame sees 39.60 degrees across, and its frame is 7.20 metres wide at 10 metres.