Skip to content
fieldofviewcalculator.com

Crop Factor Calculator

Crop factor calculator

Source sensor (your camera)
Target sensor (compare against)

Result

Crop factor (source)
1.53
35 mm equivalent focal length
76.5 mm
Equivalent aperture (depth of field only)
f/2.8
Source horizontal angle
26.56°
Source vertical angle
17.85°
Source diagonal angle
31.66°
Target horizontal angle
26.48°
Target vertical angle
17.83°
Target diagonal angle
31.58°

CF = 43.27 ÷ 28.35 = 1.53; EFL = 50 × 1.53 = 76.5 mm.

Calculate crop factor and 35 mm equivalent focal length for any sensor. Compare full frame, APS-C, Micro Four Thirds and 1-inch sensors side by side now.

What is crop factor?

Crop factor is 43.27 divided by your sensor diagonal in millimeters. A Nikon APS-C sensor measures 23.6 x 15.7 mm, so its diagonal is 28.35 mm and its crop factor is 43.27 / 28.35 = 1.53. A full frame sensor has a crop factor of 1.00, because 43.27 / 43.27 = 1.00.

The number tells you how much tighter a lens frames on your sensor than on full frame. It is a ratio, not a physical change in the lens. The lens stays the same, and the smaller sensor simply records a smaller piece of the image circle.

Sensor

  • Sensor diagonal–
  • Crop factor–
  • 50 mm equivalent–

The highlighted rectangle is the part of the full frame image your sensor records — the crop factor runs from 1.00 to 2.73.

From crop factor to equivalent focal length

Multiply the real focal length by the crop factor to get the equivalent focal length. A 50 mm lens on Nikon APS-C equals 76.5 mm on full frame, because 50 x 1.53 = 76.5 mm. A 50 mm lens on Canon APS-C equals 80.5 mm, because 50 x 1.61 = 80.5 mm. Equivalents on this site are computed with the published two-decimal crop factor, so a visitor can reproduce every number from the factor printed on the page.

Equivalent means the same angle of view, nothing more. The 50 mm lens does not become a 76 mm lens, and its real focal length printed on the barrel stays 50 mm. The equivalent number only helps you compare framing across camera bodies.

  • Equivalent focal length–
  • Horizontal angle on Nikon APS-C–

14 mm tracks to 21.4 mm equivalent; 200 mm tracks to 306.0 mm — equivalent = real focal length × the published 1.53 factor.

The five sensors on this site

The five crop factors on this site are 1.00, 1.53, 1.61, 2.00, and 2.73. Full frame is 1.00, Nikon APS-C is 1.53, Canon APS-C is 1.61, Micro Four Thirds is 2.00, and 1-inch is 2.73. Those five numbers cover the cameras most readers own, and each one is computed from the sensor width and height, not guessed.

Canon APS-C is slightly smaller than Nikon APS-C, so its factor is slightly larger. That 0.08 gap is real: a 50 mm lens equals 80.5 mm on Canon APS-C but 76.5 mm on Nikon APS-C. Treating both as 1.5x would hide a 4.0 mm difference.

Sensor — 50 mm lens

  • Sensor diagonal–
  • Crop factor–
  • 50 mm equivalent–
  • Horizontal angle–

Tap each row: diagonal, crop factor, and 50 mm equivalent highlight together — the Canon and Nikon rows differ by 4.0 mm (80.5 mm vs 76.5 mm).

The angle is the proof

Two lenses are equivalent only when their angles match. A 50 mm lens on full frame gives 39.60 degrees horizontally, and a 50 mm lens on Nikon APS-C gives 26.56 degrees, because 2 x arctan(23.6 / 100) = 26.56 degrees. The 76.5 mm equivalent on full frame gives 26.48 degrees, because 2 x arctan(36 / 153) = 26.48 degrees — 0.08 degrees under the 26.56 degrees on Nikon APS-C.

That gap is the rounding of the published two-decimal crop factor: 50 x 1.53 = 76.5 mm, while the unrounded factor 1.5263 would give 76.3 mm and angles agreeing to within 0.02 degrees. The conversion works — the two angles agree well inside the 0.5-degree tolerance of the meter below.

Check the angle whenever a conversion looks suspicious. If the angles differ, the equivalent is wrong, or the sensor size entered was wrong. The angle never lies, because it comes straight from the sensor dimension and the focal length.

Pick a pair — do the horizontal angles match within 0.5°?

  • Angle A–
  • Angle B–
  • Gap–

A match means a gap of 0.5° or less. Only the first pair matches (26.56° vs 26.48°, gap 0.08°) — the rounding of the published 1.53 factor.

The Micro Four Thirds exception

A 25 mm lens on Micro Four Thirds nearly matches a 50 mm lens on full frame, but the horizontal angle is not exact. The equivalent is 25 x 2.00 = 50.0 mm, yet the horizontal angles are 38.17 degrees and 39.60 degrees, because Micro Four Thirds is 4:3 and full frame is 3:2. The diagonals match, and the horizontals differ by 1.43 degrees.

This is the one case where "equivalent" needs a warning. The diagonal angle is the same, so the overall framing feels the same, but the horizontal edges sit slightly tighter on Micro Four Thirds. Say diagonal when you claim equality, and say horizontal when you measure it.

  • Horizontal angle–
  • Diagonal angle–
  • Frame width at 10 m–
  • Horizontal angle–
  • Diagonal angle–
  • Frame width at 10 m–

The diagonal angles match (46.81° vs 46.80°) so the corner-to-corner line stays fixed — but the horizontals differ by 1.43° (38.17° vs 39.60°), so the side edges shift.

Equivalent aperture and depth of field

Multiply the f-number by the crop factor for depth of field only, never for exposure. A 50 mm f/1.8 lens on Nikon APS-C behaves like f/2.8 for depth of field, because 1.8 x 1.53 = 2.75, shown as f/2.8. The exposure stays f/1.8, and the shutter speed does not change.

This trips up even experienced photographers. Depth of field depends on the equivalent focal length and the viewing size, while exposure depends on the real f-number and the light hitting the sensor. Keep the two ideas apart, and the numbers stop contradicting each other.

  • Real aperture (f/)–
  • Full frame equivalent aperture (f/, depth of field only)–

f/1.8 tracks to f/2.8 and f/5.6 tracks to f/8.6. Exposure stays at the real f-number — only the depth of field matches the equivalent.

Finding the lens that matches

Divide the full frame focal length you want by the crop factor to find the lens to buy. To match a 50 mm look on Nikon APS-C, buy 32.7 mm, because 50 / 1.53 = 32.68 mm, shown as 32.7 mm, and the nearest real lens is 35 mm. To match 85 mm on Micro Four Thirds, buy 42.5 mm, because 85 / 2.00 = 42.5 mm, and the nearest real lens is 42.5 mm or 45 mm.

Start from the look, work backward to the lens. Photographers who start from the lens they own and hope it matches usually end up standing in the wrong place or cropping the shot afterward.

Full frame look you want — lens to buy

  • Lens to buy–
  • Its horizontal angle–
  • Check: its 35 mm equivalent–

Nearest real lens: 35 mm for the 32.7 mm result; 42.5 mm or 45 mm for the 42.5 mm result.

What crop factor does not change

Crop factor does not change your lens, your exposure, or your perspective. A 50 mm lens on a 1-inch sensor gives a 15.04 degree horizontal angle and a 136.5 mm equivalent, because 50 x 2.73 = 136.5 mm. The lens is still 50 mm, the aperture is still what the barrel says, and the perspective is still the perspective of standing where you stand.

Perspective comes from distance, not from focal length. A cropped sensor does not compress a face or stretch a room. It only records a narrower slice of the same scene from the same spot, and that slice is what the equivalent focal length describes.

  • Horizontal angle–
  • 35 mm equivalent–
  • Frame width at 10 m–
  • Horizontal angle–
  • 35 mm equivalent–
  • Frame width at 10 m–

Same spot, same lens, same perspective — only the recorded slice narrows, from 39.60° to 15.04°. The building edges stay in exactly the same place.

Practice

  • Find the equivalent of a 24 mm lens on Nikon APS-C.

    <strong>Answer:</strong> CF = 43.27 / 28.35 = 1.53; EFL = 24 x 1.53 = 36.7 mm. Horizontal angle: 2 x arctan(23.6 / 48) = 52.36 degrees.

  • Find the equivalent of a 200 mm lens on a 1-inch sensor.

    <strong>Answer:</strong> CF = 43.27 / 15.86 = 2.73; EFL = 200 x 2.73 = 546.0 mm. Horizontal angle: 2 x arctan(13.2 / 400) = 3.78 degrees.

  • What lens matches 85 mm full frame on Canon APS-C?

    <strong>Answer:</strong> f = 85 / 1.61 = 52.8 mm. Nearest real lens: 50 mm, which gives 80.5 mm equivalent and a 25.14 degree horizontal angle.

Tap a question to see its answer.

All calculators

Frequently asked questions

The crop factor is 1.53. The diagonal is the square root of 23.6 squared plus 15.7 squared, which is the square root of 803.45, equal to 28.35 mm. Then 43.27 / 28.35 = 1.526, shown as 1.53.